747 SCS Shoes/Wrist Strap Tester, 747

Products

Services

800-335-6050

Home > Static Control > Test Instruments > Wrist Strap & Footwear Testers >

SCS Shoes/Wrist Strap Tester, 747

Images are for reference only

See Product Specifications

Manufacturer: SCS

www.scs.com

Our Price: $3,059.40

Mfg Part Number: 747

Availability: Currently Unavailable
Product Code: 747_3100

Currently Unavailable

Description

SCS 747 Shoes/Wrist Strap Tester

Daily inspection and recording of wrist straps and shoes testing are very important as fundamental countermeasures against static on personnel. A fully functional resistance tester, the SCS Shoe/Wrist Strap Tester 747 makes it possible to control both in a single unit. Use of the external data port allows automatic recording of test results, virtually eliminating manual recording and possible errors.

Features
- Checks personnel wearing wrist straps, ESD shoes and heel straps against preset resistance limits.
- Actual measurements are indicated on a 3.5 digit display and by LED lamps.
- Test results available on RS-232C serial port and output jack.
- Testing data automatically recorded when utilizing the SCS Data Logging Software 747DLS.

ESD Shoe and Heel Strap Testing
- Electrical resistance of ESD shoes and heel straps are measured and compared to present limits.
- Set value for the upper and lower resistance limits can be varied.
Upper limit: 10 megohm, 35 megohm, 100 megohm
Lower limit: 100K ohm, 1.0 megohm
- LCD display (3.5 digit) indicates actual resistance measurement value.*
- LEDs on the tester indicate Low, OK, and High test results.
- Measurement requires standing on the Shoe Testing Plate and pressing the touch panel.

*Includes body resistance

Wrist Strap Testing
- Electrical resistance of wrist straps is measured and compared to present limits.
- Set value for an upper resistance limit can be varied.
(5 megohm, 10 megohm and 35 megohm)
Lower resistance limit 650K ohm present internally.
- LCD display (3.5 digit) indicates actual resistance measurement value.*
- LEDs on the tester indicate (Low, OK, and High) test results.
- Measurement requires inserting ground cord plugs into a test jack and pressing the touch panel.

*Includes arm to wrist band contact resistance

External Output Functions
- RS-232C Serial Data Port provides resistance value and pass/fail test result information for computer data logging. Used with SCS Data Logging Software 747DLS.
- Open collector output configuration provides High and Low signal levels for pass/fail test result indication. When used with an external relay door, entries can be controlled.