Specialpromo
 
 
Facebook    Twitter    YouTube
 
 

  Home > Chemical > Conformal Coating & Stripper > Connector Coating >

Connector Coating, 1 litre (35 oz)
Connector Coating, 1 litre (35 oz)
Images are for reference only
See Product Specifications
 
Manufacturer: MG Chemicals
Mfg Part Number: 4229-1L
Units per Case: 1


Availability: Currently Unavailable
Product Code: 4229-1L_M100
No Longer Available

Description
 

A high performance replacement for standard electrical tape and shrink wrap. Seals, insulates and protects exposed wires, metal, and plastic. Forms a strong, pliable moisture resistant bond. Will not crack. Great for hard to get at areas. Tack free in minutes. Resists detergents, acids, alkalis, and sunlight. Product remains flexible from -34C° to 93°C (-30F° to 200°F).

Directions

Brush it on to almost any surface, or if applying to a component or tool, simply dip it into the coating and allow to dry. Additional coats may be applied after 20 minutes.

Specifications

Uncured Properties
Chemical type Naptha, rubber solvent
Appearance Heavy liquid
Odor Moderate
Viscosity Flow similar to SAE 60 Motor oil
Cured Properties Test Method Typical Value
Tensile Strength ASTM D 882 2600 psi
Dielectric Strength ASTM D 149 1200 v/mil
Hardness ASTM D2240 65 to 75
Shore A
Elongation ASTM D 638 400 to 500%
Temp. Range -30 °F (-34 °C) to 200 °F (93 °C)
Curing Schedule
Tack free time 10 min.
Recoat time 20 min
Full cure time (21°C) 4 hours

Available Sizes

Catalog NumberSizes AvailableDescription
4229-55ML55ml (2 oz)Liquid
4229-1L 1 liter (35 oz) Liquid
4229-4L 4 liter (1 gallon) Liquid


Share your knowledge of this product... Be the first to write a review


Browse for more products in the same category as this item:

Chemical > Conformal Coating & Stripper > Connector Coating
Chemical > Conformal Coating & Stripper
Chemical
Linecard > MG Chemicals