Mfg # 503570

Standards
- IEEE 802.3 (10Base-T Ethernet)
- IEEE 802.3ab (1000Base-T Gigabit Ethernet)
- IEEE 802.3u (100Base-TX Fast Ethernet)
- IEEE 802.3x (flow control, for full duplex mode)

General
- Media support:
- 10Base-T Cat3, 4, 5 UTP/STP RJ-45
- 100Base-T Cat5 UTP/STP RJ-45
- 1000Base-T Cat5e UTP/STP RJ-45
- Packet filter/forwarding rate:
 - 1,488,000 pps (1000 Mbps)
 - 148,800 pps (100 Mbps)
 - 14,880 pps (10 Mbps)
- Buffer memory: 128 kBytes
- MAC address table: 2048 entries
- Backplane speed: 3.2 Gbps
- Switch architecture: store and forward
- Certifications: FCC Class A, EN55022 Class A, CE Mark

LEDs
- Power
- LINK/TX
- Full/half duplex
- Collision

Power
- Power supply:
 - Input voltage: 24 V DC (12 – 48 V DC), dual inputs
 - Reverse polarity protection: present
- Power consumption: 5.1 Watts (maximum) at 24 V

Environmental
- Aluminum housing, IP30 protection
- Dimensions: 53 (W) x 135 (H) x 105 (D) mm (2.1 x 5.3 x 4.1 in.)
- Weight: 700 g (1.5 lbs.)
- Operating temperature: -10 – 70°C (14 – 158°F)
- Operating humidity: 5 – 95% RH, non-condensing
- Storage temperature: -40 – 85°C (-40 – 185°F)

Regulatory Approvals
- EMI:
 - FCC Class A
 - EN55022 Class A
- EMC:
 - EN61000-4-2
 - EN61000-4-3
 - EN61000-4-4
 - EN6100-4-5
 - EN6100-4-6
- Safety:
 - UL
 - cUL
 - CE/EN60950
- Shock: IEC 60068-2-27
- Free fall: IEC 60068-2-32
- Vibration: IEC 60068-2-6
- MTBF: 287,250 hours
 Calculated MTBF is based on MIL-HDBK-217F (Military Handbook) standard

Package Contents
- Industrial Gigabit Ethernet Switch
- User manual