Facebook    Twitter    YouTube

  Home >

SCS Dissipative Hard Laminate Sheets 8375, 5 ft x 12 ft, White
SCS Dissipative Hard Laminate Sheets 8375, 5 ft x 12 ft, White
Images are for reference only
See Product Specifications

Manufacturer: SCS
Mfg Part Number: 8375

Availability: Currently Unavailable
Product Code: 8375_3100
Currently Unavailable

SCS Dissipative Hard Laminate Sheets Beige/Gray/White
Dissipative Hard Laminate Sheets are used where a hard, durable, electrically safe surface is needed, providing a low coefficient of friction to permit heavy objects to slide easily. Controlled conductivity (surface-to-ground) virtually eliminates shock hazard when working on a powered component.

This material is post-formable with normal high pressure laminate process techniques used by furniture makers. Using this technique, a tight 0.5 in. (1.27 cm) radius is possible, which allows installation without seams in corners and over rounded edges when forming parallel to sanding lines. The laminate provides a comfortable rounded front on which personnel can rest their arms.
It is resistant to common solvents and to hot solder droppings.

Note: For consistent static charge dissipation from rigid, conductive flat-bottomed totes and trays, use of a pad or mat of SCS Dissipative Vinyl Material 8200 in conjunction with this static-protective hard laminate is suggested, especially in areas where relative humidity often drops below 30%.


Property                                 Typical Value
Thickness                               0.037 in. (0.9 mm)
Abrasion resistance:               > 1500 cycles Tabor Wheel 32                                
   (Surface to Ground)            1 x 10^6 ohm
   (Surface to Surface)            6 x 10^7 ohm

*Tested per ESD Association Standard 4.1 at 72�F, 50% RH using SCS Test Kit 701 for Static Control Surfaces (Megohmmeter).

Share your knowledge of this product... Be the first to write a review