Specialpromo
 
 
Facebook    Twitter    YouTube
 
 

  Home > Soldering & Rework > Solder & Flux > Solder Bar >

AIM Solder SN100C Lead-Free Solder Bar 1.134 KG
AIM Solder SN100C Lead-Free Solder Bar 1.134 KG
 
Manufacturer: AIM Solder
Our Price: $130.40
Mfg Part Number: SN100C


Availability: Available
Product Code: SN100C_A222
Qty :

Description
 
Sn/Cu/Ni + Ge alloy Bright solder joints, improved wetting Melting Point 227C

SN100C is a lead-free solder alloy developed by Nihon Superior in Japan that is comprised of tin-copper-nickel + germanium. SN100C offers user-friendly properties and has been proven in commercial production since 1999. The result of these advantages is that SN100C offers high-throughput and the lowest cost of ownership as compared to any other lead-free solder alloy.

Customer experience over several years is that the TOTAL cost of running a standard wave soldering machine with SN100C when all factors are taken into account can be up to one third the cost of running the same machine with tin-silver-copper alloys. The actual saving in each case will depend on the number of factors that apply, but the cost of running a line with SN100C is always lower than the cost of running the same line with tin-silver-copper.
Features
  • Does not contain silver or bismuth.
  • Eutectic alloy.
  • Bridge-free and icicle-free soldering.
  • Smooth, bright, well-formed fillets, free of gross micro-cracks, irrespective of the cooling rate.
  • Good through-hole penetration.
  • Good topside fillet formation.
  • Dross rate equal or lower than tin-lead solder.
  • Does not require a nitrogen atmosphere.
  • Does not erode copper from holes, pads and tracks.
  • Low rate of copper leaching makes it easy to control the copper content of the solder bath.
  • Lower aggressiveness to stainless steel and other solder pot materials as compared to tin-silver-copper alloys.
  • Thermal fatigue resistance and creep strength better than tin-lead.
  • Slow, even growth of the intermetallic layer at the solder/substrate interface.
  • Also performs well in selective and dip soldering.

Average Rating: Average Rating: 4 of 5 4 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
4 of 5 SURVEY May 19, 2016
Reviewer: Lucie Roy from Boucherville, QC Canada  
PERFECT

Was this review helpful to you?


Browse for more products in the same category as this item:

Soldering & Rework > Solder & Flux > Solder Bar
Soldering & Rework > Solder & Flux
Soldering & Rework
Linecard > AIM Solder > Solder Bar
Linecard > AIM Solder


T18-D16 TIP,1.6D,FX-8801,907/900M/913
TD-100A Tip-Heater Cartridge Soldering Iron with Tool Stand
PLCC Removal tips. PLCC-44, PQFP-84. Tips for TT-65 handpiece.
507 FLAT RIBBON CABLE CUTTER for 506
T18-D16 TIP,1.6D,FX-8801,907/900M/913
TD-100A Tip-Heater Cartridge Soldering Iron with Tool Stand
PLCC Removal tips. PLCC-44, PQFP-84. Tips for TT-65 handpiece.
507 FLAT RIBBON CABLE CUTTER for 506
$9.40
$293.70
$151.80
$103.95