ST 70 Power Module Controlled Soldering Station, TD-100, 120V

ST 70 Power Module Controlled Soldering Station

No knobs, displays or programming ... just plug in a Power Module, turn it on, and it works!

Power Modules Precisely Control Temperature!

The ST 70 is a single channel system that comes equipped with the TD-100 Tip-Heater Cartridge Soldering Iron, considered by many to be the most comfortable soldering handle available. Unlike Metcal/Easy Braid/Thermaltronics "curie point' technologies, which requires the user to buy expensive tips to change temperature, the ST 70 regulates temperature via the use of 8 different Power Modules™. You never have to buy additional tips to change temperature with the ST 70!

ST 70 regulates temperature via the use of 8 different Power Modules

No Knobs, No Displays, No Programming ... Just Turn It On, and It Works!

The ST 70 is extremely easy to operate. Simply select the performance/heat level you desire, plug in the appropriate color-coded Power Module into the front panel, and the system takes care of the rest! Each Power Module heat level corresponds to a Fahrenheit temperature equivalent, so that Heat Level 6.5 is roughly equivalent to 650°F, Heat Level 7.5 is similar to 750°F and so on (see chart below). A color-coded diode tells you when you are ready to solder. The ST 70 is supplied with 6.5, 7 and 7.5 Power Modules; higher or lower Heat Levels are optionally available.

Power Module heat levels correspond to a Fahrenheit temperature equivalent, thus Heat
Level 6.5 is roughly equivalent to 650°F, Heat Level 7.5 is similar to 750°F and so on

Significantly Lower Your Costs with TD-100 Tip-Heater Cartridges

The system is packaged with the TD-100 Tip-Heater Cartridge Soldering Iron, considered by many to be the most comfortable soldering handle available, along with Tip & Tool Stand. Crafted by a team of surgical instrument engineers to eliminate fatigue and improve control, the PACE TD-100 is simply the most ergonomic, powerful and easy to use soldering iron on the market today! The handpiece uses a patented Tip-Heater Cartridge which can be changed in seconds, and most tips heat up within 10 seconds flat! Yet TD-100 single point soldering tips cost less than $11 (US) ... compare that to the much higher prices of Hakko, Metcal, Easy Braid, Thermaltronics and JBC tips!

     
Most single point TD-100 Tip-Heater Cartridges cost less than $11, heat up in seconds
and are Hot-Swappable without tools and without turning the power supply off!

Power Without Expense!

But just because they cost less doesn't mean TD-100 soldering tips are less powerful. Performance and responsiveness is exceptional, perfect for demanding Lead-Free or multilayer soldering. TD-100 Tip-Heater Cartridges feature instantaneous load sensing and on-demand power. Thermal demand is continuously monitored and the heater responds immediately by providing power to meet the demand from the work, without overshoot. And operators are not locked into a single temperature like Metcal, Easy Braid or Thermaltronics, which require a separate (and very expensive) tip to be purchased for each temperature desired!

Primary Features

• IntelliHeat Closed Loop Temperature Control Technology
• Performance Level Lockout - if Power Module is removed, the system is shut down
• Supplied with 6.5, 7 and 7.5 Power Modules (5 other Power Module Heat Levels optionally available)
• Tip & Tool Stand comes with Sponge, Stay-Moist Well, non-abrasive Brass Wool to clean oxidation and holds up to 6 tips
• Completely ESD/EOS safe; ESD grounding jack
• Durable aluminum extrusion housing incorporates "T-Slots" for mounting
• Stackable
• Can be mounted under bench or shelf with optional Bracket P/N 1321-0609-P1
• Optional Instant SetBack Cubby available for extending tip-life
• Expand capabilities with optional IntelliHeat handpieces: MT-100 MicroTweez, TT-65 ThermoTweez and PS-90 Soldering Iron