IPC-A-610 Theoretical course on circuit assembly & inspection widely used electronics assembly acceptance standard in the electronics industry.

IPC-A-610 is a must-have standard for inspectors, operators and others with an interest in the acceptance criteria for electronic assemblies. IPC-A-610 is developed in synergy with J-STD-001 and IPC/WHMA-A-620.

IPC-620E Theoretical & Practical course is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies.

IPC-620E describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies.

IPC-J-STD is recognized globally for its criteria on soldering processes and materials of circuit board assembly.

This is a must-have for those in the electronics industry with an interest in the process and acceptance criteria for electrical and electronic assemblies. IPC-J-STD is developed in synergy with IPC-A-610 and is supported by IPC-HDBK-001 for those wanting additional information and explanation on the requirements.

IPC-7711/21 Theoretical & Practical course that provides procedures for how to rework, repair and modification of printed board assemblies, it is the electronic Industry’s standard for the guidelines on removing and replacing electronic components and repairing circuitry with minimum impact on quality and reliability.

IPC-7711/21 recommended techniques, tools, equipment and materials required to perform removal, replacement, and repair operations on Plated Through Hole and Surface Mount components. As well as common procedures, for coating removal.