CFA125010HS - Fan 12VDC, 50mm x 10mm, 12.2 CFM, Sleeve Bearing

Locked Rotor Alarm Signal Output (yellow wire lead): Under normal conditions a locked rotor alarm signal outputs a constant signal frequency... if the fan stops spinning or "locks", it then outputs a "LOW" condition signal. If the fan starts spinning again, the "LOW" condition signal will go away.
Dimensions: 50 x 50 x 10mm (1.97 x 1.97 x 0.39")
Mounting Center: 40mm (1.57")
Rating: 12VDC
Current: 0.16 Amps
Power: 1.92 W
Bearing: Sleeve
Speed: 5500 RPM
Noise: 32 dBA
Max Air: 12.21 CFM
Max Pressure: 2.54 mmH2O
Temperature: -10 to +70 C
Hours: 20000-30000
Termination: Wire leads
Weight: 20g
Impeller: Glass fibre reinforced plastic 94V-0 PBT
Frame: Glass fibre reinforced plastic 94V-0 PBT