My Cart: (0) item(s)
Thumbnail Filmstrip of DH1X: Drill Holster, Small Images
The DH1X Small Drill Holster brings additional features to a drill holster. The exterior sides of the DH1X integrate 3 small pockets perfect for 2-4” bits, short extensions, and/or nut drivers. A horizontal strip of webbing along the top provides an easy-to-reach perch for short driver tips as well as storing the safety lanyard clip while working at height. A stainless steel badge is a handy location to clip a tape measure. The DH1X offers two options for attaching itself to a belt or tool bag: a belt pass-through or a integrated wire-formed belt clip.
SPECIFICATION
PRODUCT SPECIFICATIONS:
- Height (H): 9" (23 cm)
- Width (W): 6" (15 cm)
- Depth: 3" (7.5 cm)
- Weight (empty): 0.5 lbs/0.2 kg
- Internal Volume: n/a
- Max Payload: 7.5lbs/3.5kg
MAXIMIZED TOOL STORAGE CAPACITY:
- Rugged construction
- Belt pass-through
- D-RINGS FOR OPTIONAL CARRY HANDLE (NOT INCLUDED)
- Stainless steel tape measure clip
- 3 External pockets for 2-4" bits and short extensions and/or nut drivers
- 4 1" bit holders
- Safety lanyard
- Belt clip
OTHER FEATURES:
- Warranty: 5 Years (see Veto warranty terms and conditions)
ADDITIONAL INFORMATION
VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!
Features
- RUGGED CONSTRUCTION
- Belt Pass-through
- D-RINGS FOR OPTIONAL CARRY HANDLE (NOT INCLUDED)
- STAINLESS STEEL TAPE MEASURE CLIP
- 3 External pockets for 2-4" bits and short extensions and/or nut drivers
- 4 1” Bit holders
- Safety lanyard
- Belt Clip
- Sell Sheet call-outs:
- Belt pass-through for 2” wide belt
- Optional safety Lanyard
| Manufacturer (aka Brand): | VETO PRO PAC |
No Reviews Yet!
Review this product
Request a quote for this product
Thank you! We’ll review your request within 24hrs. Your selected products will be saved in your account.
Not logged in?
Sign In or
Create an Account
to save your quote request details.