Name: LBC-15 Olive Lunch Box Cooler
Brand: VETO PRO PAC
SKU: VPP10513_V183
Price: 374.29 CAD
Availability: BackOrder

Thumbnail Filmstrip of LBC-15 Olive Lunch Box Cooler Images

Image are for reference only
See Product Specifications

The larger LBC-15 lunchbox-sized cooler provides an additional 305in3/5 liters of non-insulated storage within the lid. Unzip either side of the lid to slide out an injection molded plastic storage drawer; or remove completely to use as an eating tray. The LBC-15 also includes 6 additional exterior everyday carry storage pockets around the perimeter of the bag, including a pocket perfect for an eReader or small tablet computer. Available in Carbon and Olive Green. Note: Ice Pack not included.

SPECIFICATION

PRODUCT SPECIFICATIONS:

Height: 16" (41.cm)
Width: 17" (43cm)
Depth: 13” (33cm)
Weight (empty): 8.5lbs (4.0kg)
Max Payload: 30lbs (14kg)
Internal Volume: 1007in3 (16.5L)
Length in bottom of cooler liner: 10.6" (measured left to right)
Depth in bottom of cooler liner: 6.6" (measured front to back)
Inside height of cooler liner: 9.2"

MAXIMIZED TOOL STORAGE CAPACITY:

• Holds up to 12 16oz/473ml beverage cans OR 12 12oz long neck bottles OR 16 12 oz cans • Zipperless air-tight access with magnetic latch • Injection molded removable liner • Rigid foam insulation • Zippered exterior pocket • Removable carrying handle & shoulder strap • Reflective accents for safety • Over-molded TPR rubber waterproof polypropylene base • 5-Year limited warranty

OTHER FEATURES:

Warranty: 5 Years (see Veto warranty terms and conditions)

FEATURES:

• Holds up to 12 16oz/473ml beverage cans OR 12 12oz long neck bottles OR 18 12 oz cans

• Zipperless air-tight access with magnetic latch

• 300in 3/5 liters of addtional storage in lid

• 6 exterior pockets

• Injection molded removable liner

• Rigid foam insulation

• Removeable Dry Storage tray

• Zippered exterior pocket

• Removable carrying handle & optional shoulder strap

• Reflective accents for safety

• Over-molded TPR rubber waterproof polypropylene base

• 5-Year limited warranty

ADDITIONAL INFORMATION

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don't Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

Thumbnail Filmstrip of LBC-15 Olive Lunch Box Cooler Images

Image are for reference onlySee Product Specifications

LBC-15 Olive Lunch Box Cooler

Features

Image are for reference only
See Product Specifications