Name: MB5B TOOL BAG (USA) Large Meter Bag Backpack
Brand: VETO PRO PAC
SKU: VPP10530_V183
Price: 463.79 CAD
Availability: BackOrder

Thumbnail Filmstrip of MB5B TOOL BAG (USA) Large Meter Bag Backpack Images

Image are for reference only
See Product Specifications

The MB5B is an extra large and highly-configurable front accessed meter bag. The MB5B is offered in two configurations: For technicians in the UK, Europe & Australia the MB5B has been optimized for safely storing a Multifunction Tester (MFT) inside the bag while also accomodating hand tools in any of the exterior pockets. Alternatively the MB5B has been configured for storing a variety of handtools inside the bag while separately storing 1-2 clamp meters in the 2 padded side mounted zippered pockets. Once the bag is loaded out it can be worn over both shoulders using the included backpack straps, over a single shoulder via the padded shoulder strap, or at your side with over-molded gripped handle. Finally the bag features and additional 8 pockets on the front flap as well as a padded tablet computer pocket on the back.

SPECIFICATION

PRODUCT SPECIFICATIONS:

Height (H): 15” (38cm)
Width (W): 15" (38cm)
Depth (D): 8" (20.3cm)
Weight (empty): 9lbs/4.1kg
Internal Volume: 840 in3/ 13.8L
Max Payload: 45lbs/20.5kg

MAXIMIZED TOOL STORAGE CAPACITY:

21 exterior tool pockets
Rear padded tablet computer pocket: 11"(H) x 10" (W) x 1" (D)
Detachable/optional backpack straps
2 padded side-mounted meter or tool pockets with repositionable interior pockets
V-SWAP™ removable component system - choose from several included or optional panels
Removable storage box & adjustable height shelf for accommodating a Multifunction Tester
“Hang-up” hook - accessible while open and closed
Over-molded rubber grip
8" electrical tape strap
Polypropylene plastic base for moisture and abrasion protection

OTHER FEATURES:

Warranty: 5 Years (see Veto warranty terms and conditions)

ADDITIONAL INFORMATION

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don't Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

Thumbnail Filmstrip of MB5B TOOL BAG (USA) Large Meter Bag Backpack Images

Image are for reference onlySee Product Specifications

MB5B TOOL BAG (USA) Large Meter Bag Backpack

Features

Image are for reference only
See Product Specifications