Indispensable for avoiding thermal shock on multilayer PCBs while reworking.

This is a complete system of Preheater and PCB support for preheating big-sized PCBAs such as communications boards, airplanes, etc.

The PHXLE features three work modes:

Power Mode allows working at a fixed power level with the option of using protection thermocouples.

Temperature Mode keeps the PCBA at a selected temperature, using the regulation thermocouple and, optionally, protection thermocouples.

Profile Mode allows control of the heating rate of the PBCA by the use of control and protection thermocouples, without exceeding the recommended limit levels in each application.

The equipment incorporates three recommended predefined profiles:
- For 1.6mm PCB with 2 layers.
- For 1.6mm PCB with 4-6 layers.
- For 2.2mm PCB with 6 or more layers.
In addition, it features 22 customizable profiles.

Up to 8 thermocouples can be connected which enable the operator to work in any of the three work modes.

It features a heating area of 510 x 610 mm / 20.07 x 24 in. with 6 independent work zones (255 x 203 mm / 10.04 x 8 in) to be switched on/off.

With the software JBCSuite the preheater can be synchronized with other JBC hot-air, soldering as well as fume extractor equipment in order for them to work jointly and to perform your rework process optimally.

PHXLS PCB Support is perfectly adapted to any type of PCBs by means of its many adjustable components and its 3 adjustable clearance positions 28, 38 or 48 mm / 1.1, 1.5 or 1.9 in.