TESE is a precision hot air station capable of reworking small and medium SMDs.

The combination of the exclusive JBC hot air system with protectors, tripods and extractors ensures desoldering components easily and safety, concentrating the heat on the selected component as show:

Desoldering with TESE Precision Hot Air Station

1. Placing

Choose the extractor, or protector and tripod, which best fits the component.

2. Heating

While you apply the heat to the component, the surrounding elements are protected

3. Extracting

Automatic withdrawal of the desoldered component.

Connecting an external thermocouple provides a high-precise close-loop control of the component/PCB during the rework process or can also be used to protect a component or a specific area of the PCB.

As all the JBC Stations, the TESE has a menu with more than 10 parameters to customise the control unit.

PRODUCT COMPOSITION

1 Instruction Manual

1 JTSE Power Hot Air Control Unit

1 TET Precision Heater Hose Set

1 TES Stand for TET

1 ESHT Magazine for Protectors & Extractors

1 E2052 Extractor 52 (20 x 20 mm)

1 E2064 Extractor 64 (20 x 26 mm)

1 E2184 Extractor 80 (24 x 24 mm)

1 P2220 Protector 32 (10 x 10 mm)

1 P2235 Protector 24 (12 x 17 mm)

1 P4000 Protector 44 (12.5 x 12.5 mm)

1 P2230 Protector 48 (15 x 15 mm)

1 P4010 Protector 60 (17 x 17 mm)

1 T2050 Tripod Ø 39 mm

1 T2250 Tripod Ø 85 mm

1 CU110 Cups for Extractors & Tripods

1 A2330 Suction Tube for Protectors & Extractors

1 TN9209 Straight Nozzle Ø3 for TET

1 TN9208 Straight Nozzle Ø4 for TET

1 TN9080 Straight Nozzle Ø5 for TET

1 PH218 Thermocouple Type K

1 PH217 Kapton Tape