SMT3UT - SMT Board, SOIC Footprints, Size 3 (100x160mm), 0.8mm thick

SMT3U-Thin is a prototyping circuit board for 0805, 1206, SOIC, SOT and other SMT parts. This thin version of the PCB is 1/32" thick which makes it easy to cut. The thinner PCB also provides lower inductance to the ground plane which can be important in some RF circuits.SMT3UT has three SOIC-32 footprints, each routed to 32 pads. The SMT rectangle pads are spaced for 0805 and 1206 components. The SMT rectangle pads have 0.1" spacing to allow DIP ICs and headers to be attached. A through hole prototyping area for headers, power connections, and DIP ICs is provided. The BusBoard zig-zag circuit pattern on the through hole area allows easy access to both sides of headers and ICs.A solid ground plane on the back side provides an easy way to make ground connections and helps lower noise for RF and high speed logic circuits. Every second SMT rectangle pad has an unplated hole for easy connection to the ground plane on the back side. Just insert a wire and solder both sides. Two power rails and four mounting holes are provided.
Double-sided high-quality FR4 glass-epoxy circuit board with unplated holes
0.1" x 0.2 rectangular SMT pads for surface mount components; three SOIC-32 footprints
1oz/ftsq copper with an anti-tarnish coating for easy soldering; lead-free and RoHS compatible
0.031" (0.79mm) holes (unplated) for connections to ground plane in SMT area; 0.037" (0.94mm) holes (unplated) for ICs or square post headers in through hole area
Standard single height (3U) Eurocard/VME size: 3.9" wide, 6.3" long, 1/32" thick (100 x 160 x 0.8mm)