My Cart: (0) item(s)
Thumbnail Filmstrip of TECH-XL Technicians Extra Large Tool Bag Images
Built for work and built to last, this is the service technician’s version of the award-winning XL tool bag. The TECH-XL features 80 pockets and plenty of space for hand tools, parts boxes, meters, a cordless impact drill and other bulkier items. 9 small neoprene pockets have been added for drill bits and bit extensions. A bag that holds a payload, with fingertip tool access and maximum tool storage.
SPECIFICATIONS
PRODUCT SPECIFICATIONS:
- Height: 15" (38cm)
- Width: 16.5” (42cm)
- Depth: 9.5" (24cm)
- Bag Height (to Handle): 20.5" (52cm)
- Weight (empty): 8.5 lbs. (4kg)
- Internal Volume: 1660inc3 (27L)
- Max Payload: 45lbs (20kg)
MAXIMIZED TOOL STORAGE CAPACITY:
- Vertical Tool Pockets: 80 interior and exterior pockets of various sizes
- Neoprene Pockets: 2 Large, 3 Medium and 9 Small (for bits or memory sticks)
- D-Rings: 4 large and 5 small
- 8” Electrical Tape Strap
- Stainless Steel Tape Clip
RUGGED MATERIALS & CONSTRUCTION:
- Waterproof Base: 3mm Injection Molded Polypropylene
- Waterproof Body Fabric: 1800 PVC Impregnated Denier Nylon
- Waterproof Tool Pocket Fabric: 1800 PVC Impregnated Denier Nylon
- Handle: Injection Molded Nylon Plastic w/ over-molded ergonomic rubber grip
- Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers with Oversized Zipper Tabs
- Fold-Back Snaps: 6 zinc, marine grade
- D-Rings: Powder Coated Steel
- Rivets: 38 zinc, marine grade rivets
- Stitching: Industrial Strength Double Nylon Stitching
OTHER FEATURES:
- Shoulder Strap: Extra-Wide, Heavy Duty, Padded Shoulder Strap Clips onto Handle
- Warranty: 5 Years (see Veto warranty terms and conditions)
FEATURES:
• Vertical Tool Pockets: 80 interior and exterior pockets of various sizes
• Neoprene Pockets: 2 Large, 3 Medium and 9 Small (for bits or memory sticks)
• D-Rings: 4 large and 5 small
• 8” Electrical Tape Strap
• Stainless Steel Tape Clip
• Waterproof Base: 3mm Injection Molded Polypropylene
• Waterproof Body Fabric: 1800 PVC Impregnated Denier Nylon
• Waterproof Tool Pocket Fabric: 1800 PVC Impregnated Denier Nylon
• Handle: Injection Molded Nylon Plastic w/ over-molded ergonomic rubber grip
• Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers with Oversized Zipper Tabs
• Fold-Back Snaps: 6 zinc, marine grade
• D-Rings: Powder Coated Steel
• Rivets: 38 zinc, marine grade rivets
• Stitching: Industrial Strength Double Nylon Stitching
• Shoulder Strap: Extra-Wide, Heavy Duty, Padded Shoulder Strap Clips onto Handle
• Warranty: 5 Years (see Veto warranty terms and conditions)
ADDITIONAL INFORMATION
VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!
Features
- Vertical Tool Pockets: 80 interior and exterior pockets of various sizes
- Neoprene Pockets: 2 Large, 3 Medium and 9 Small (for bits or memory sticks)
- D-Rings: 4 large and 5 small
- 8” Electrical Tape Strap
- Stainless Steel Tape Clip
- Waterproof Base: 3mm Injection Molded Polypropylene
- Waterproof Body Fabric: 1800 PVC Impregnated Denier Nylon
- Waterproof Tool Pocket Fabric: 1800 PVC Impregnated Denier Nylon
- Handle: Injection Molded Nylon Plastic w/ over-molded ergonomic rubber grip
- Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers with Oversized Zipper Tabs
- Fold-Back Snaps: 6 zinc, marine grade
- D-Rings: Powder Coated Steel
- Rivets: 38 zinc, marine grade rivets
- Stitching: Industrial Strength Double Nylon Stitching
- Shoulder Strap: Extra-Wide, Heavy Duty, Padded Shoulder Strap Clips onto Handle
- Warranty: 5 Years (see Veto warranty terms and conditions)
| Manufacturer (aka Brand): | VETO PRO PAC |
No Reviews Yet!
Review this product
Request a quote for this product
Thank you! We’ll review your request within 24hrs. Your selected products will be saved in your account.
Not logged in?
Sign In or
Create an Account
to save your quote request details.