My Cart: (0) item(s)
Thumbnail Filmstrip of TP5B Hard Base Tool Pouch Images
The TP5B is a larger version of the TP4B tool pouch with an injection molded base, extra tool pocket depth, adjustable hammer (or large hand tools) loops, and a riveted stainless steel tape measure clip. The plastic, hard bottom offers moisture protection along with extra stability. This service pouch stands up, bottom protected, and is ready to help carry and organize your most needed tools for any job or service call.
SPECIFICATIONS
PRODUCT SPECIFICATIONS:
- Height (H): 11" (28cm)
- Width (W): 10” (25.5cm)
- Depth: 5” (12.5cm)
- Weight (empty): 2.5 lbs. (1kg)
- Max Payload: 15lbs (7kg)
- Internal Volume: 300in3 (5L)
RUGGED MATERIALS & CONSTRUCTION:
- Leather Trim Panels
- D-Rings: Powder Coated Steel
OTHER FEATURES:
- Detachable Rubber Handle
- Metal Tape Clip Holder
- Metal Pouch Clip
- Warranty: 5 Years (see Veto warranty terms and conditions)
FEATURES:
• 17 Vertical tool pockets
• Plastic hard bottom
• Metal tape clip holder
• Metal pouch clip
• 2.5” Wide belt slot
• Electrical tape strap & chain
• Detachable rubber handle
• Small meter pockets
• Flap bit pocket
• Adjustable Velcro tool loops
• 5-Year warranty
ADDITIONAL INFORMATION
VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!
Features
- 17 Vertical tool pockets
- Plastic hard bottom
- Metal tape clip holder
- Metal pouch clip
- 2.5” Wide belt slot
- Electrical tape strap & chain
- Detachable rubber handle
- Small meter pockets
- Flap bit pocket
- Adjustable Velcro tool loops
- 5-Year warranty
| Manufacturer (aka Brand): | VETO PRO PAC |
No Reviews Yet!
Review this product
Request a quote for this product
Thank you! We’ll review your request within 24hrs. Your selected products will be saved in your account.
Not logged in?
Sign In or
Create an Account
to save your quote request details.