My Cart: (0) item(s)
Thumbnail Filmstrip of V-SWAP Tool Panel, TECH PAC MC Blackout/BUILD-OUT Images
This Tool Panel is a swappable tool and equipment storage organization component designed exclusively for the TECH PAC MC BLACKOUT and the TECH PAC MC BLACKOUT BUILD-OUT. This V-SWAP™ panel option provides a number of pockets for safely storing tools and technology required on the job site.
SPECIFICATIONS
PRODUCT SPECIFICATIONS:
- Height (in): 15.5” (39.5cm)
- Width (in): 11.5" (29cm)
- Total number of pockets: 14
MAXIMIZED TOOL STORAGE CAPACITY:
- 10 various sized pockets ideal for a wide range of small tools and accessories
- 4 large elastic pockets for storing more sensitive instruments or bulky hand tools
- D-rings for easy removal as well as hanging the panel for easier acccess, use out of the bag or storing
- Velcro backed for securing inside the TECH PAC MC
OTHER FEATURES:
- Warranty: 5 Years (see Veto warranty terms and conditions)
ADDITIONAL INFORMATION
VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!
| Manufacturer (aka Brand): | VETO PRO PAC |
No Reviews Yet!
Review this product
Request a quote for this product
Thank you! We’ll review your request within 24hrs. Your selected products will be saved in your account.
Not logged in?
Sign In or
Create an Account
to save your quote request details.